CTC AGL PRODUCTS
AGL SECONDARY
CONNECTOR KITS
Field-attachable secondary connector kit designed to provide a watertight electrical connection between AGL isolating transformer secondary leads and airfield lighting fittings or secondary cables.
FEATURES & ENGINEERING
Engineered for reliable and secure AGL secondary-circuit connections.
Field-Attachable Construction
Designed for field installation and connection according to the approved assembly procedure.
Watertight Connection
Elastomeric molded insert provides reliable watertight protection for outdoor and underground AGL applications.
2-Core Secondary Cable Compatibility
Designed for 2 × 2.5/4 mm² secondary AGL cable used on the secondary side of isolating transformers.
Environmental Resistance
Designed to withstand demanding AGL conditions including water, soil, fuel, alkali, acid, de-icing agents, ozone and weathering.
Reliable Electrical Contact
Copper-alloy, tin-plated crimp contacts provide the specified electrical connection.
Direct Burial & Base-Can Ready
Suitable for direct burial and base-can applications as specified in the TDS.
PRODUCT RANGE & TECHNICAL SPECIFICATIONS
Secondary Connector Kit
BUILT FOR AIRFIELD LIGHTING SYSTEMS
Reliable secondary-circuit connections for demanding airport ground lighting installations.
RUNWAY LIGHTING
Suitable for secondary connections used with runway edge lighting systems.
TAXIWAY LIGHTING
Designed for secondary-side connections in taxiway edge lighting applications.
THRESHOLD & RUNWAY-END LIGHTING
Applicable to transformer-fed threshold and runway-end light fittings.
STOP-BAR LIGHTING
Suitable for secondary connections used in stop-bar lighting systems.
GUIDANCE SIGNS
Can be used with AGL guidance signs supplied through isolating transformers.
AGL LIGHTING FIXTURES
Designed for secondary connections associated with transformer-fed AGL fixtures.
FREQUENTLY ASKED QUESTIONS
A secondary connector kit provides the electrical connection between the secondary side of an AGL isolating transformer and the connected airfield lighting circuit or fitting.
The specified model is CTC38S.
The specified conductor configuration is 2 × 2.5/4 mm².
The CTC38S uses a twin-conductor receptacle, FAA L-823 Style 5/12.
Yes. The TDS specifies compatibility with direct burial and base-can applications and states that the connector is submersible in water and soil.
The specified voltage drop is ≤ 6.0 mV at 20 A.
Looking for the Right OCEM Airfield Lighting Solution?
Explore our range of OCEM airfield lighting products for runway and taxiway systems, PAPI, approach lighting, illuminated guidance signs, and AGL control systems.